Quantcast
Industry Cortex

Document Brief

4200 Series MMIs...

4272, 4275, 4285, 42105, 42150(S/T) Installation & Operations Manual, Software Reference, and Connection Guide Version 2.6.0...

Control Technology Corp 25 South Street Hopkinton, MA 01748 Phone 888.818.2600 Fax 508.435.2373 www.ctc-control.com 99676REV01JAN05...

About this Manual...

This document is based on information available at the time of its publication. While efforts have been made to be accurate, the information in this document may not cover all details or variations in hardware or software, nor does it provide for every possibility concerning installation, operation, or maintenance. Features may be described herein which are not present in all hardware. CTC assumes no obligation of notice to holders of this document with respect to changes subsequently made. Information in this document is subject to change without notice and does not represent a commitment on the part of CTC....

Safety Instructions...

This section states the safety instructions which must be followed when installing, operating and servicing the MMI. If neglected, physical injury and death may follow, or damage may occur to controller and related equipment. The material in this chapter must be studied before attempting any work on, or with, the unit....

Warnings and Notes...

This manual distinguishes safety instructions. Warnings are used to inform of conditions, which can, lead if proper steps are not taken, to a serious fault condition, physical injury or death. Notes are used when the reader is required to pay special attention or when there is additional information available on the subject. Notes are less crucial than warnings, but should not be disregarded. Readers are notified of the need for special attention or additional in formation available on the subject with the following symbols ...

Readers are informed of situations that can result in serious physical injury and/or serious damage to equipment with the symbol shown to the left. A Warning symbol indicates that the reader should pay special attention to the accompanying text. Take precautionary steps to insure that the installation complies with warnings. Warnings include hazardous conditions that could cause personal injury or equipment damage if care is not taken. The text next to this symbol describes ways to avoid the danger. Dangerous Voltage Warnings Warns of situations in which high voltage can cause physical injury and or damage equipment. General warning Warns o...

Document Keywords

documentation Easybuilder for Model 4200 touchscreen customer downloads ctcview easy builder4200

About Control Technology Corp.

Control Technology Corp. makes web enabled automation controllers and automation software that increase productivity and quality.

Contact

508-435-9595, 800-282-5008 (toll free)
Fax: 508-435-2373

sponsored links